Latest Project Updates
Rs.602 Million Latches Hinges Door beam Mfg. Project in Sri Sathya Sai, Andhra Pradesh
Executive Summary: A company plans to establish a manufacturing unit for latches, hinges, and door beams in an industrial park in Andhra Pradesh, with a capacity of 35,000 sets per year. The project’s estimated cost is ₹602 million. As of October 2025, the company has obtained consent from the state pollution control authorities to set up the facility.
New Plastic Containers Mfg. Project in Guntur, Andhra Pradesh
Executive Summary: A company plans to set up a plastic container manufacturing facility in Guntur, Andhra Pradesh, with an annual capacity of 2.5 million (10 L), 6 million (1 L), and 0.5 million (5 L) containers. The project’s estimated cost is ₹84 million. As of October 2025, the company has obtained consent from the state pollution control authorities to establish the project.
Rs.9500 Million New Solar Cells Mfg. Unit in Ganjam, Odisha
Executive Summary: A company plans to establish a new solar cell and PV module manufacturing unit in Odisha’s Gopalpur Industrial Park, with a production capacity of 1.2 GW solar cells and 1 GW PV modules. The project has an estimated cost of Rs. 9,500 million, with construction scheduled from January to June 2026. As of October 2025, environmental clearance is under review.
Rs.150000 Million New Display Module Assembly Unit in Tamil Nadu
Executive Summary: A technology company, in collaboration with a major electronics manufacturer, is setting up India’s first smartphone display module manufacturing and assembly plant in Tamil Nadu. The project, with an investment of around Rs. 150,000 million, aims to strengthen the domestic smartphone supply chain. Located at ESR Oragadam Industrial & Logistics Park near Chennai, construction is already underway as of October 2025.
Railway Axles Mfg. Expansion Project in West Bengal
Executive Summary: Yantra India is planning a Railway Axles Manufacturing Expansion Project at Metals and Steel Factory, Ishapore, Kolkata, West Bengal. The project aims to increase production capacity from 30,000 to 70,000 axles per annum over the next two to three years. As of October 2025, pre-project activities are underway.
Rs.189 Million Cable Making Machine Assembly Unit Expansion Project in Sangareddy, Telangana
Executive Summary: A cable-making machine assembly unit expansion is planned in Phase-III, Pashamailaram, Patancheru, Sangareddy, Telangana. The project aims to increase manufacturing capacity from 50 to 170 machines per annum and spare parts from 250 to 490 units per annum. Estimated at ₹189.5 million, the project has received state pollution control consent as of October 2025.
Rs.30000 Million Solar Cells and Modules Mfg. Expansion Project in South 24 Parganas, West Bengal
Executive Summary: Websol Energy Systems, in joint venture with AMP Energy India, is establishing a monocrystalline PERC solar cell and module manufacturing unit in Section 2, Falta, West Bengal. The project, targeting 1.2 GW initially, expanded to 12 million cells/month and 181,980 modules/month with Rs. 4,500 million investment. Phase III (2 GW) completes June 2027 and Phase IV (2 GW) June 2028, totaling Rs. 30,000 million.
Rs.2712 Million Haldia Facility Expansion Project in Haldia, West Bengal
Executive Summary: A new industrial area is planned in Chikkamagaluru, Karnataka, covering 236.95 acres with 176 industrial, commercial, and amenity plots. The project, estimated at Rs. 373.6 million, began construction in December 2023 and is expected to complete by December 2025. Environmental clearance has been submitted to the State Level Environment Impact Assessment Authority.
Rs.5100 Million New Aerospace Manufacturing Unit in Sri Satya Sai, Andhra Pradesh
Executive Summary: A new aerospace manufacturing unit is planned on 47 acres in Andhra Pradesh, with an estimated investment of ₹5,100 million. The project aims to enhance aerospace production capabilities in the region. As of October 2025, preparatory activities are ongoing, marking the initial phase before construction and full-scale operations commence.
New PVC Pipe Fittings Mfg. Project in Muzaffarpur, Bihar
Executive Summary: A company plans a new PVC pipe fittings manufacturing project in Muzaffarpur, Bihar, with an estimated investment of ₹43.2 million. The investment proposal was submitted to the state Investment Promotion Board Secretariat on 16th July 2025, and as of October 2025, the project has received official approval, paving the way for implementation.